Australia Best Table Saw Of June - Top Reviews By Experts

The table saws are labelled by the size circular blades they can accommodate. Most accept blades up to 10 inches, but a few take blades up to 12 inches. Blade height and angle can be adjusted, allowing for shallow cuts of a fraction inch or deeper cuts. The newest generation of table saws--many cordless or corded/cordless--spin a 7 1/2-inch blade, similar to that on a circular saw.

These saws come in blade sizes of 10 inches and 12 inch. A 10-inch tablesaw can make cuts up to 3 1/2 inch deep.

Safety is the most important factor when using any power tool with a large blade.

Table saws are equipped with guards to prevent your fingers from coming into contact with the blade. The table saws also come with safety stops to prevent injury in the event that your fingers are brought into contact with a blade.

Some models come with pusher tools which allow you to guide a board for a smooth cut, while keeping your hands away from the blade. Do not remove or modify the safety features on your table saw.

Wear safety glasses and be alert while using a tablesaw.

Consider taking a tablesaw course if you are new to the tool.

You can learn to safely use the table saw and gain a better understanding of what type of saw you would ultimately like to buy.

Portable table saws can be called worksite, benchtop or job site saws. They are usually made from lightweight materials such as aluminum tables, which makes them easy to transport. They may have wheels to make moving them even easier. Portable saw motors are smaller and less powerful than those on table saws.

Portable table saws are generally less stable, have less cutting power, and suffer more vibration because they weigh less - between 60 and 100 pounds.

Parts like the fence are often not interchangeable with aftermarket components because of the construction of the saw.

These saws are available for between $250 and 600 dollars and can be plugged in to any 110-volt outlet. This is a compromise that many professionals and amateurs are willing to make in order to have the tools they need for basic crosscutting and ripping, wherever they may be.

Pros:
The portable.
The device is compatible with standard 100-volt outlets.
Very affordable.

Cons:
Stability is reduced.
More vibration
When cutting thicker hardwoods or softwoods, the blade may stall.

Hybrid saws are a great option for woodworkers who want to combine the lightweight of a contractor saw with sturdier construction and a more powerful motor of cabi saws. They also come at comparatively lower prices. These saws can cost around $1,200 and weigh less than 300 pounds. The motors of these machines are usually 1.5 to 1.75 horsepower and can be operated with 110V outlets.

Pros:
Portable saws combine the benefits of table saws, but with the lighter weight and lower cost of portable saws.
The light weight of the product allows it to be easily moved around.

Cons:
You should test your hybrid tablesaw's performance under load and get to know its quirks.

Contractor saws are heavier than portable saws. They weigh between 150-350 pounds on average, but they're still portable. The table is made of cast iron and the motor is more powerful. They are still within the reach of more dedicated hobbyists. Contractor saws range from $800 to $2,000. These saws are great for cutting basic tasks and making furniture or cabinetry.

Pros:
Portable but more stable than benchtop models.
Prices are moderate.
Cuts through hardwoods and thicker woods.

Cons:
You will have difficulty cutting through hardwoods.

Professional woodworkers prefer cabinet saws. As part of the super-sturdy construction, a more powerful induction engine, usually 3 to 5, HP, is enclosed within a cabinet. This table saw type is perfect for making straight, smooth cuts in hardwoods without having to worry about excessive vibration. But all that power and stability has a cost. Cabinet saws can start at around $2,300 for the low-end models and go up to $5,000 for industrial tablesaws.

Pros:
Very stable
It has enough torque and horsepower to make straight, smooth cuts even on thicker hardwood boards.

Cons:
It is very expensive.
The workshop floor is usually anchored (or at least very difficult to move).
This table saw uses much more power than other smaller models, so it requires a separate electrical circuit.

Ripping is the term for long cuts made along the grain of a board. This is done to change the width of a piece of wood.

Crosscutting is the cutting of a board across its grain, such as when a board is sawed in half or a few inches are trimmed off to change the length.

Dado cutting is a speciality cut that creates an angled groove, a notch or a trench in a board. Most often, this type of cut will be used to make furniture. These specialty cuts are made easier with dado sets that include special inserts and blades. However, you can also make some of these cuts using just a table saw.

With a few simple adjustments to the blade or miter gauge, table saw blades are also capable of making angled cuts.

The more horsepower in the motor of a tablesaw, the greater the cutting power. The smaller benchtop saws with horsepower in the range 3/4 hp - 1 1/2 hp can handle most of what a table saw is capable of cutting. However, they might not produce a smooth cut like a contractor saw or cabinet saw. These ratings are usually expressed in "amps", i.e. 15 amps, and indicate how many amps the tool uses. Benchtop tools can be found on every jobsite or workshop. They are used to measure everything from hardwoods to shelving for woodworking projects to pressure-treated plywood for backyard projects.

Cabinet table saws are often equipped with motors of 5 hp or more. Motors with higher horsepower can run for longer without overheating, even when used heavily (think of cabinet shops where the motors are used all day long, every day). They also cut through harder materials like ironwood and Brazilian walnut.