Top 10 Best Jump Starter South Africa Of 2023 - Save With Appliance Experts

The amount of energy that a device can store, expressed in watt-hours(Wh), determines how much power it can produce. The higher the number, the more jump-starts a unit can do before it needs to be recharged.

You will receive cables to connect to the terminals of the battery to transfer electricity from the jump starter to the vehicle battery. The majority of experts recommend using a cable at least 12 feet in length.

The power output of a jump starter is the amount of current it supplies. Your starter should have enough power for your battery to be restarted and the engine to start charging. You can find out how much power you need in the owner's manuals for your car and your battery.

The power output of a jump starter can be measured in three different ways.

The jump starter is measured in "cranking amps" (CA). This represents the starting power of the jump starter at 32 degrees Fahrenheit.
Cold-cranking Amps: Cold cranking amps (CCA), measure the power of a starter at 0.0 degrees Fahrenheit. If you live in the Northeast and may need to jump start your car during cold weather, this measurement is important.
Peak amps is the maximum power that the jump starter battery can deliver to the car battery. Some jump starter manufacturers will only provide this number. As a general rule, higher peak amps is better.

Your jump starter's battery will either be lithium or lead-acid, which will affect the size.

Since years, lead-acid batteries are used. They are stronger and more durable than lithium batteries. They are also bulky and make for a bigger jump starter.

Jump starters with lithium batteries that are compact and weigh only a few pounds use them. They are small and easy to store inside your car. Lithium batteries can be used as portable chargers for electronics such as phones, laptops and tablets. These batteries are usually not as powerful. Although manufacturers are now producing more powerful lithium batteries that have the same power output, they are also more expensive.

CA and CCA are much lower than peak amperage ratings because they measure continuous power for 30 seconds. CCA is measured at 32 degrees F while CA measures it at 0 degree F. This rating is crucial for those who live in cold climates. The CA and CCA rating is usually located at the top of your vehicle's battery. You want a jump start with CA and CCA ratings near (ideally, above) the respective number. This is usually between 400-500 in most passenger vehicles.

The output of the portable jump start is known as "Starting Amps", or something like that, if it is not able to maintain high amperage levels for at least 30 seconds in order to meet CA and CCA standards.

These numbers will help you narrow down the portable jump starters that are available.

Jump starters range in weight from 20.0-30.0 pounds down to 1.0-2.0 pounds. You may choose a smaller jump starter if you drive a car and have limited space. If you have a large vehicle, need a jump starter with more power or have a portable charger, then a larger jump starter may be the best option for you.

The manufacturers love to boast about this figure, but it does not mean that bigger is always better. The higher the peak-amperage rating of a jump start, the stronger it is initially. Peak amperage for units powered by lead acid batteries is the initial burst of power delivered by the device, usually lasting 20-50 milliseconds. This is followed by 30 seconds sustained amperage which is classified as Cranking Amps or Cold Cranking Amps depending on temperature.

Portable jump starters using lithium-ion batteries are not able to deliver high amps for long periods of time due to thermal runaway, a phenomenon where lithium-ion cells can self-heat uncontrollably, resulting in a fire. They can deliver high amps for only a few seconds and then cut the power.

Batteries Plus experts also provided some clarification. They said that jump starters usually list the approximate number of starts a fully charged device is capable of before it must be recharged. A half-charged device will always deliver the same amount of power until it is drained. The device will not perform as many jump starts as a fully charged device.

Each jump starter battery has a unique charging method. Most commonly, jump starter batteries can be charged via an electrical outlet, USB port, or solar panel. You'll need to determine which jump starter is best for your vehicle and you before purchasing one.

Most new jump starters that use lithium batteries offer more than simply restarting an old car battery. The USB ports on a lithium battery that is versatile can be used as a portable charger. Look into lithium jump starters if this is a feature that you need. Some jump starters include an air compressor and tire inflator.